Compressor Oil: Markings

compressor oil

Compressor oil. The marking of compressor oils was developed in the 1980s and has not changed to this day.

There are three major groups of compressor oils:

  • Oils for compressors operating at partially-loaded conditions, and compressing air and gas, insoluble in the oil, at discharge temperature below 160 ° C;
  • Oil for compressors operating at discharge temperatures below 180 ° C;
  • Oils for compressors operating at full-load conditions at discharge temperature below 200 ° C;
  • Oils for high pressure compressors that operate in hostile environments at temperatures exceeding 200 ° C.

The marking for compressor oils is rather simple. First, there is a roman letter “K”, which represents compressor oil. It is followed by a number of the group of oil, followed by a hyphen and another number that represents the kinematic viscosity of the oil at 100°C.

Cleaning of compressor oils

Compressor oils are contaminated both during storage and during use. Mechanical particles, water and dissolved gases degrade the performance properties of compressor liquids, which may lead to failure of piston-type and rotary-screw compressors, turbo machines and refrigeration machines.

GlobeCore developed special equipment for purification and recovery of compressor oils. The GlobeCore plant allows you to reuse compressor oil, bringing its parameters close to the original. The refined oil will not contain harmful impurities or water.

GlobeCore equipment makes the operation of compressor units stable, their service life is extended and downtime reduced, even in the event of potential breakdowns during operation.

обновлено: March 30, 2017 автором: dannik