{"id":1611,"date":"2014-08-08T13:38:03","date_gmt":"2014-08-08T13:38:03","guid":{"rendered":"http:\/\/gcequipment.com\/?p=1611"},"modified":"2016-06-23T13:08:28","modified_gmt":"2016-06-23T13:08:28","slug":"method-for-oil-regeneration","status":"publish","type":"post","link":"https:\/\/oilregeneration.globecore.com\/method-for-oil-regeneration","title":{"rendered":"Methods for Transformer Oil Regeneration"},"content":{"rendered":"

Methods of Oil Regeneration<\/em><\/strong><\/p>\n

\"Elkima

Elkima Trafo, Turkey<\/p><\/div>\n

During power transformer operation, stability of the insulating oil gradually decreases due to oxidation, extreme heat, decomposition of insulating materials, etc.\u00a0 In order to monitor oil quality in oil-filled equipment <\/em><\/strong> such as power transformers, there are various kinds of tests that can perform what is known as Oil Analysis<\/strong><\/em>.\u00a0 An oil analysis testing program will reveal important diagnostic information such as water content, acid number and other important indicators of oil condition that signal timely preventive maintenance requirements.\u00a0 Aging of transformer oil primarily appears as oxidation, which causes an increase in the acid number.\u00a0 As the acid number increases above 0.08, the acids and other contaminates in the oil will become aggressive towards the insulating paper thereby damaging and reducing the the service life of the paper and the transformer.\u00a0 Oil stability therefore, is defined as the ability of the oil to resist the effects the oxidation process.\u00a0 Oil quality, oil oxidation inhibitors, and timely preventive maintenance all contribute to greater oil stability.<\/p>\n

Methods of Regeneration for Transformer Oil<\/em><\/strong><\/p>\n

Assertion<\/em><\/strong><\/p>\n

The purpose of all methods of oil regeneration is the assertion and removal of waste products, various mechanical impurities and water from the insulating oil.\u00a0 It is based on the precipitation of particles and contaminates that are dissolved and suspended in the oil.\u00a0 Under the influence of gravity, the water and mechanical impurities, that have a higher density than the oil, precipitate with time, forming the precipitate.\u00a0 Assertion significantly simplifies and furthers the process of regeneration, but the dirt and water is not completely removed with assertion.\u00a0 The main advantage of assertion is its extreme simplicity, low cost, and safety for the oil.\u00a0 The main disadvantage is its long processing time.<\/p>\n

Mechanical Purification of Impurities<\/em><\/strong><\/p>\n

All methods of petroleum fluid purification that remove solids can be divided into two categories.\u00a0 The first category includes methods that are based on the process of separating solids by passing the contaminated oil through the porous walls of a filtering system.\u00a0 The second category includes all cleaning methods that utilize some type of “force.”<\/strong><\/em>\u00a0 Hydraulic filters are members of the first category that includes slot (wire and plate), mesh, metal-ceramic, ceramic, paper, cardboard, felt, fabric, glass cloth, glass wool types filters as well as filters from compressed fibrous materials and various plastics.\u00a0 The second category includes any process in which the fluids are cleansed of insoluble impurities by means of force using magnetic, electrical, gravity, centrifugal force, etc.<\/p>\n

Purification using Centrifugal Cleaners<\/em><\/strong><\/p>\n

Inside centrifugal cleaners (centrifuges, separators), the particles are separated from the fluid by centrifugal force that is generated during the high speed rotation of the contaminated liquid.\u00a0 Centrifugal cleaners can be used for cleaning only those liquids whose density differs substantially from the density of the solid or liquid impurities.<\/p>\n

Physico-Chemical Methods<\/strong><\/em><\/p>\n

Coagulation<\/em><\/strong>.\u00a0 This method is based on the consolidation of pollutant particle substances existing in finely divided form that is achieved by using special substances called coagulates.<\/p>\n

Adsorption<\/strong><\/em>.\u00a0 This method is based on the ability of the adsorbents to retain polluting products on its surface and on the surface of the pores. Adsorbents may be the substances such as natural (clays, bauxite, natural zeolites) or artificial (alumina, silica-alumina compound) origin.<\/p>\n

Ion exchange purification<\/em><\/strong>.\u00a0 This method is based on the ability of ion-exchange resins to detain pollution that are dissociated in the dissolved state into ions.<\/p>\n

Selective treatment<\/em><\/strong>.\u00a0 This method is based on the properties of the individual substances that pollute the oil (oxygen, sulfur and nitrogen compounds) which can be selectively dissolved under the influence of certain chemicals.<\/p>\n

Chemical Methods<\/strong><\/em><\/p>\n

Sulfuric Acid Cleaning<\/strong><\/em>.\u00a0 The method is based on the interconnection of substances that pollute the oil and put sulfuric acid into the oil.<\/p>\n

Hydrogenation<\/strong><\/em>. \u00a0This method is based on the interaction of pollutants, which treats the contaminated oil with hydrogen.<\/p>\n

Oil Regeneration<\/em><\/strong><\/p>\n

Also know as Transformer Oil Regeneration<\/em><\/strong> (restoring oil to its original new condition) is performed in several ways including: (1) Zeolites Oil Purification; (2) Purification through a Filter Press; and (3) Cleaning by drying in a centrifuge (purification method, clarification, clarification with dryer vacuum).<\/p>\n

Zeolite filter<\/em><\/strong> cleaning method was developed on the base of the mass transfer process, which is widely used in the chemical industry.\u00a0 Mass transfer and heat transfer is a complicated process involving transfer of substances within the range of one phase as well as across the interface into the other phase.<\/p>\n

For deep regeneration<\/strong><\/em> of oil with a high acid number, there is an acid-alkaline cleaning method in which the oil is treated with sulfuric acid that seals and connects all unstable oil compounds and acid sludge.\u00a0 Residues of organic acids and sulfuric acid are neutralized by adding alkali to the oil and removes tar through settling.\u00a0 The oil is then washed with distilled water, dried and is treated with bleaching earth to complete the neutralization process.\u00a0 The restored oil is then retrieved after the final stage of filtering.<\/p>\n

Silica<\/strong><\/em> is used for regeneration of low or moderately oxidized oils.\u00a0 Oil is repeatedly chased through the filtering system filled with silica gel.\u00a0 Oil flow, as a rule, is carried out by pump. centrifuge or filter press, which include the adsorber on the output.\u00a0 Other types of oil regeneration is accomplished with heating.<\/p>\n

GlobeCore<\/strong><\/em> has developed the industry leading GlobeCore Process<\/strong><\/em> of oil regeneration for transformer preventive maintenance. \u00a0GlobeCore’s<\/em><\/strong> advance line of regeneration equipment utilize an automatic Fuller’s Earth reactivation system that allows GlobeCore<\/em><\/strong> to offer the most advanced and cost effective units in the industry today.\u00a0 It is time to get with the Process, the GlobeCore Process<\/em><\/strong>!<\/p>\n","protected":false},"excerpt":{"rendered":"

Methods of Oil Regeneration During power transformer operation, stability of the insulating oil gradually decreases due to oxidation, extreme heat, decomposition of insulating materials, etc.\u00a0 In order to monitor oil quality in oil-filled equipment such as power transformers, there are various kinds of tests that can perform what is known as Oil Analysis.\u00a0 An oilRead More <\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[2],"tags":[],"class_list":["post-1611","post","type-post","status-publish","format-standard","hentry","category-case_studies"],"language":"en","acf":[],"_links":{"self":[{"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/posts\/1611","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/comments?post=1611"}],"version-history":[{"count":0,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/posts\/1611\/revisions"}],"wp:attachment":[{"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/media?parent=1611"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/categories?post=1611"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/tags?post=1611"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}