\u0421\u041c\u041c-12R operation principle: fuller’s earth filtration of mineral oil<\/b><\/h2>\n
The CMM-12R units regenerate and restore transformer oil by percolation of the oil through Fuller\u2019s earth sorbent: it\u2019s fuller’s earth filtration. Beside, this system can heat, degas, dry and filter the dielectric fluid. Sorbent reactivation occurs alonig with processing of the oil \u2013 inside the unit. After reactivation the Fuller\u2019s earth can be used normally.<\/p>\n
![\"DSCN73192\"](\"http:\/\/oilregeneration.globecore.com\/wp-content\/uploads\/sites\/10\/2016\/01\/DSCN73192.jpg\")
<\/p>\n
The \u0421\u041c\u041c-12R is connected directly to the transformer tank, forming a closed oil circulation line: the oil to be regenerated flows into the unit, processed oil flows back into the transformer. The flow of oil, along with vibration and heat in the transformer, also facilitates removal of contaminants from cellulose insulation.<\/p>\n
After GlobeCore\u2019 oil reclamation process, the oil is chemically identical to new dielectric fluid. Additives improve the oil\u2019s oxidation stability, further extending its service life.<\/p>\n
Advantages of \u0421\u041c\u041c-12R unit for oil reclamation: <\/b><\/h2>\n\n- mobility and onsite operation;<\/li>\n
- oil reclamation without taking the transformer offline and setting up tanks for oil transfer and storage;<\/li>\n
- reactivation of sorbent directly in the unit. The sorbent can be reactivated up to 300 times, the equivalent of 1,5-2 years of operation;<\/li>\n
- removal of both solved and unsolved contaminants from the used oil;<\/li>\n
- process automation. The system operates according to the program and does not require operator intervention;<\/li>\n
- operator comfort (separate work place, PC controls, ventilation);<\/li>\n
- optional equipment to control oil level in the transformer, a generator for autonomous operation, inhibitor injection section to add oxidation stabilizer into the oil.<\/li>\n<\/ul>\n
Specifications of CMM-12R for Oil Reclamation<\/b><\/h3>\n\n\n\n\nParameter<\/strong><\/p>\n<\/td>\n\nValue<\/strong><\/p>\n<\/td>\n<\/tr>\n\n1 Capacity, m3\/hour, min<\/td>\n \n4<\/p>\n<\/td>\n<\/tr>\n
\n2 <\/i>Processed oil parameters:<\/td>\n<\/tr>\n\n<\/td>\n Moisture by weight, g\/t(ppm) as per IEC 733; ASTM D-1533<\/td>\n \n5<\/p>\n<\/td>\n<\/tr>\n
\nFiltration, \u00b5m<\/td>\n \n5<\/p>\n<\/td>\n<\/tr>\n
\nVolumetric gas content in % as per IEC 60599; ASTM D-3612<\/td>\n \n0,1<\/p>\n<\/td>\n<\/tr>\n
\nAcid number, mg KOH\/g as per IEC 296; ASTM D-664<\/td>\n \n0,01<\/p>\n<\/td>\n<\/tr>\n
\nCorrosive sulfur, ISO 5662; ASTM D-1275<\/td>\n \nNone<\/p>\n<\/td>\n<\/tr>\n
\nDielectric strength, kV, IEC 156; ASTM D-1816<\/td>\n \n70<\/p>\n<\/td>\n<\/tr>\n
\nInterfacial tension, N\/m, at 25\u00ba\u0421, ISO 6295; ASTM D-2285<\/td>\n \n45<\/p>\n<\/td>\n<\/tr>\n
\nDissipation factor at 90\u00ba\u0421, IEC 247; ASTM D-924<\/td>\n \n0,001<\/p>\n<\/td>\n<\/tr>\n
\n\nOxidation stability<\/p>\n
Acid number, mg KOH\/g,<\/p>\n
IEC 1125\u0410; IEC 1125B; IP-307<\/td>\n
\n0,2<\/p>\n<\/td>\n<\/tr>\n
\n3<\/i> Max oil output temperature in heating mode, \u00ba\u0421<\/td>\n \n90<\/p>\n<\/td>\n<\/tr>\n
\n4<\/i> Outlet pressure, bar, not less than<\/td>\n \n1,5<\/p>\n<\/td>\n<\/tr>\n
\n5 <\/i>Oil heater power, kW, not more than<\/td>\n \n54<\/p>\n<\/td>\n<\/tr>\n
\n6<\/i> Max power consumption, kW<\/td>\n \n69<\/p>\n<\/td>\n<\/tr>\n
\n7 Power parameters<\/td>\n<\/tr>\n \n<\/td>\n voltage, V<\/td>\n \n380<\/p>\n<\/td>\n<\/tr>\n
\nAC frequency, Hz<\/td>\n \n50<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
Client benefits after purchasing the unit for fuller’s earth filtration:<\/b><\/h3>\n\n- complete restoration of transformer oil;<\/li>\n
- extension of transformer life time from 20 to 35 years;<\/li>\n
- significant reduction of storage space required for waste oil;<\/li>\n
- saving on buying new oil and disposing of waste oil;<\/li>\n
- training of client\u2019s personnel;<\/li>\n
- Starting and commissioning of the unit by our engineering team on site (if necessary);<\/li>\n
- qualified consulting by GlobeCore<\/strong><\/em> experts during operation of the oil reclamation unit.<\/li>\n<\/ul>\n
GlobeCore<\/strong><\/em> equipment can be in stock or custom design. Stock models can be purchased directly from the factory\u2019s warehouse. Custom orders require 45 work days lead time.<\/p>\n","protected":false},"excerpt":{"rendered":"Power transformers are the most widely used elements of power plant and power distribution systems. Operation of transformers is an important factor in reliability of power transformation, distribution and transmission. Most transformer currently in operation are either nearing their projected service life, or have already exceeded it. Full scale replacement of all such equipment isRead More <\/a><\/p>\n","protected":false},"author":7,"featured_media":3197,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[2],"tags":[245,42,46,244],"class_list":["post-3195","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-case_studies","tag-transformer-life-time","tag-transformer-oil-purification","tag-transformer-oil-regeneration","tag-transformer-service"],"acf":[],"language":"en","_links":{"self":[{"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/posts\/3195","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/users\/7"}],"replies":[{"embeddable":true,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/comments?post=3195"}],"version-history":[{"count":0,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/posts\/3195\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/media\/3197"}],"wp:attachment":[{"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/media?parent=3195"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/categories?post=3195"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/tags?post=3195"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Specifications of CMM-12R for Oil Reclamation<\/b><\/h3>\n\n\n\n\nParameter<\/strong><\/p>\n<\/td>\n\nValue<\/strong><\/p>\n<\/td>\n<\/tr>\n\n1 Capacity, m3\/hour, min<\/td>\n \n4<\/p>\n<\/td>\n<\/tr>\n
\n2 <\/i>Processed oil parameters:<\/td>\n<\/tr>\n\n<\/td>\n Moisture by weight, g\/t(ppm) as per IEC 733; ASTM D-1533<\/td>\n \n5<\/p>\n<\/td>\n<\/tr>\n
\nFiltration, \u00b5m<\/td>\n \n5<\/p>\n<\/td>\n<\/tr>\n
\nVolumetric gas content in % as per IEC 60599; ASTM D-3612<\/td>\n \n0,1<\/p>\n<\/td>\n<\/tr>\n
\nAcid number, mg KOH\/g as per IEC 296; ASTM D-664<\/td>\n \n0,01<\/p>\n<\/td>\n<\/tr>\n
\nCorrosive sulfur, ISO 5662; ASTM D-1275<\/td>\n \nNone<\/p>\n<\/td>\n<\/tr>\n
\nDielectric strength, kV, IEC 156; ASTM D-1816<\/td>\n \n70<\/p>\n<\/td>\n<\/tr>\n
\nInterfacial tension, N\/m, at 25\u00ba\u0421, ISO 6295; ASTM D-2285<\/td>\n \n45<\/p>\n<\/td>\n<\/tr>\n
\nDissipation factor at 90\u00ba\u0421, IEC 247; ASTM D-924<\/td>\n \n0,001<\/p>\n<\/td>\n<\/tr>\n
\n\nOxidation stability<\/p>\n
Acid number, mg KOH\/g,<\/p>\n
IEC 1125\u0410; IEC 1125B; IP-307<\/td>\n
\n0,2<\/p>\n<\/td>\n<\/tr>\n
\n3<\/i> Max oil output temperature in heating mode, \u00ba\u0421<\/td>\n \n90<\/p>\n<\/td>\n<\/tr>\n
\n4<\/i> Outlet pressure, bar, not less than<\/td>\n \n1,5<\/p>\n<\/td>\n<\/tr>\n
\n5 <\/i>Oil heater power, kW, not more than<\/td>\n \n54<\/p>\n<\/td>\n<\/tr>\n
\n6<\/i> Max power consumption, kW<\/td>\n \n69<\/p>\n<\/td>\n<\/tr>\n
\n7 Power parameters<\/td>\n<\/tr>\n \n<\/td>\n voltage, V<\/td>\n \n380<\/p>\n<\/td>\n<\/tr>\n
\nAC frequency, Hz<\/td>\n \n50<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
Client benefits after purchasing the unit for fuller’s earth filtration:<\/b><\/h3>\n\n- complete restoration of transformer oil;<\/li>\n
- extension of transformer life time from 20 to 35 years;<\/li>\n
- significant reduction of storage space required for waste oil;<\/li>\n
- saving on buying new oil and disposing of waste oil;<\/li>\n
- training of client\u2019s personnel;<\/li>\n
- Starting and commissioning of the unit by our engineering team on site (if necessary);<\/li>\n
- qualified consulting by GlobeCore<\/strong><\/em> experts during operation of the oil reclamation unit.<\/li>\n<\/ul>\n
GlobeCore<\/strong><\/em> equipment can be in stock or custom design. Stock models can be purchased directly from the factory\u2019s warehouse. Custom orders require 45 work days lead time.<\/p>\n","protected":false},"excerpt":{"rendered":"Power transformers are the most widely used elements of power plant and power distribution systems. Operation of transformers is an important factor in reliability of power transformation, distribution and transmission. Most transformer currently in operation are either nearing their projected service life, or have already exceeded it. Full scale replacement of all such equipment isRead More <\/a><\/p>\n","protected":false},"author":7,"featured_media":3197,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[2],"tags":[245,42,46,244],"class_list":["post-3195","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-case_studies","tag-transformer-life-time","tag-transformer-oil-purification","tag-transformer-oil-regeneration","tag-transformer-service"],"acf":[],"language":"en","_links":{"self":[{"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/posts\/3195","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/users\/7"}],"replies":[{"embeddable":true,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/comments?post=3195"}],"version-history":[{"count":0,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/posts\/3195\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/media\/3197"}],"wp:attachment":[{"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/media?parent=3195"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/categories?post=3195"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/tags?post=3195"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Parameter<\/strong><\/p>\n<\/td>\n Value<\/strong><\/p>\n<\/td>\n<\/tr>\n 4<\/p>\n<\/td>\n<\/tr>\n 5<\/p>\n<\/td>\n<\/tr>\n 5<\/p>\n<\/td>\n<\/tr>\n 0,1<\/p>\n<\/td>\n<\/tr>\n 0,01<\/p>\n<\/td>\n<\/tr>\n None<\/p>\n<\/td>\n<\/tr>\n 70<\/p>\n<\/td>\n<\/tr>\n 45<\/p>\n<\/td>\n<\/tr>\n 0,001<\/p>\n<\/td>\n<\/tr>\n Oxidation stability<\/p>\n Acid number, mg KOH\/g,<\/p>\n IEC 1125\u0410; IEC 1125B; IP-307<\/td>\n 0,2<\/p>\n<\/td>\n<\/tr>\n 90<\/p>\n<\/td>\n<\/tr>\n 1,5<\/p>\n<\/td>\n<\/tr>\n 54<\/p>\n<\/td>\n<\/tr>\n 69<\/p>\n<\/td>\n<\/tr>\n 380<\/p>\n<\/td>\n<\/tr>\n 50<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n GlobeCore<\/strong><\/em> equipment can be in stock or custom design. Stock models can be purchased directly from the factory\u2019s warehouse. Custom orders require 45 work days lead time.<\/p>\n","protected":false},"excerpt":{"rendered":" Power transformers are the most widely used elements of power plant and power distribution systems. Operation of transformers is an important factor in reliability of power transformation, distribution and transmission. Most transformer currently in operation are either nearing their projected service life, or have already exceeded it. Full scale replacement of all such equipment isRead More <\/a><\/p>\n","protected":false},"author":7,"featured_media":3197,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[2],"tags":[245,42,46,244],"class_list":["post-3195","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-case_studies","tag-transformer-life-time","tag-transformer-oil-purification","tag-transformer-oil-regeneration","tag-transformer-service"],"acf":[],"language":"en","_links":{"self":[{"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/posts\/3195","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/users\/7"}],"replies":[{"embeddable":true,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/comments?post=3195"}],"version-history":[{"count":0,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/posts\/3195\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/media\/3197"}],"wp:attachment":[{"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/media?parent=3195"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/categories?post=3195"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/oilregeneration.globecore.com\/en\/wp-json\/wp\/v2\/tags?post=3195"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}\n \n 1 Capacity, m3\/hour, min<\/td>\n \n \n 2 <\/i>Processed oil parameters:<\/td>\n<\/tr>\n \n <\/td>\n Moisture by weight, g\/t(ppm) as per IEC 733; ASTM D-1533<\/td>\n \n \n Filtration, \u00b5m<\/td>\n \n \n Volumetric gas content in % as per IEC 60599; ASTM D-3612<\/td>\n \n \n Acid number, mg KOH\/g as per IEC 296; ASTM D-664<\/td>\n \n \n Corrosive sulfur, ISO 5662; ASTM D-1275<\/td>\n \n \n Dielectric strength, kV, IEC 156; ASTM D-1816<\/td>\n \n \n Interfacial tension, N\/m, at 25\u00ba\u0421, ISO 6295; ASTM D-2285<\/td>\n \n \n Dissipation factor at 90\u00ba\u0421, IEC 247; ASTM D-924<\/td>\n \n \n \n \n \n 3<\/i> Max oil output temperature in heating mode, \u00ba\u0421<\/td>\n \n \n 4<\/i> Outlet pressure, bar, not less than<\/td>\n \n \n 5 <\/i>Oil heater power, kW, not more than<\/td>\n \n \n 6<\/i> Max power consumption, kW<\/td>\n \n \n 7 Power parameters<\/td>\n<\/tr>\n \n <\/td>\n voltage, V<\/td>\n \n \n AC frequency, Hz<\/td>\n \n Client benefits after purchasing the unit for fuller’s earth filtration:<\/b><\/h3>\n
\n