In September, GlobeCore released another hot air drying unit “Mojave Heat-100”.
It is the most compact equipment in this range, which provides a more convenient operation and transportation. “Mojave Heat-100” is indispensable during installation, maintenance and repair of transformer tanks. The unit prevents moisture getting into the electrical insulation by pumping hot dry air under pressure.
The adsorbent is regenerated directly in the equipment. Therefore, it does not require periodic unloading and loading. And avoids losses of zeolite during maintenance.
Technical characteristics of Mojave Heat-100
|1. Dry air capacity, m3 / min, min||1,7|
|2. Dry air max dew point, ° С||– 50|
|3. Dry air pressure, MPa / bar||0,018/0,18|
|4. Max dry air temperature, ° С||90±15|
|5. Adsorbent load, kg, max||190|
|6. Number of adsorbers, pcs.||1|
|7. Zeolite max regeneration temperature, ° С||430|
|8. Air heater power, kW, max||24|
|9. Power consumption, kW, max||Air drying (normal mode)||1|
|Regeneration of adsorbent in the adso||25|
|Hot air input||25|
|10. Three-phase 50Hz, AC voltage, V||380|
|11. Temperature of hot air output for regeneration of adsorbent, ° С, max||430|
|12. Time for adsorbent regeneration, hours||4|
|13. Fineness of dry air filtration, μm||5|
|14. Overall dimensions, mm, max:||length||1350|
|15. Weight, kg, max||550|
For information, advice and purchasing of this equipment please contact one our contacts.