Bitumen Emulsion Plant 2 m3/h

UVB-1

The UVB-1- Bitumen Unit is designed for the production of anionic and cationic bitumen emulsions that are used for the following purposes:

  • tack-coating of the old road pavement base before laying new asphalt/concrete;
  • preparation of cold asphalt/concrete mixes;
  • surface treatment of paved surfaces;
  • thin protective coatings;
  • road top patching;
  • damp-proofing of buildings and structures;
  • soft roof construction and repairing.

COMPONENT DESCRIPTION
Emulsifier Tank Heater

Bitumen Emulsion Plant 2 m3/h

Heater has a flat pipe-welded design with heat-transferring fluid circulating inside.  200 liter emulsifier tank is placed on the top of this heater.

   Specifications  Value
 1 Maximum capacity (taking into account preparation time), m3/h  2
 2 Minimum bitumen consumption (at penetration rate 90…130), m3/h  1.5
 3  Water consumption, m3/h  0.6… 1.5
 4  Flux consumption (at bitumen penetration rate less than), dm3/h  0… 50
 5  Acid consumption, dm3/h  5… 20
 6  Emulsifier consumption, dm3/h  5… 20
 7  Adhesive additive consumption, dm3/h  1… 20
 8  Maximum input bitumen pressure,  MPa  0.2
 9  Pressure of bitumen supplied the blender, MPa  1.4… 1.6
 10  Water phase pressure supplied to blender, MPa  0.2
 11  Input bitumen temperature, oC  140-160
 12  Input water temperature, oC  40-60
 13  Maximum emulsion output lift, (m)  15
 14  Maximum power consumption, kW  17
 15  Power circuit voltage at 50Hz, V  400
 16  Compressed air pressure, bar  4… 6
 17  Air consumption, dm3/min  250
 18  Dimensions, mm, maximum length/width/height, mm
 19  Weight, kg, maximum 1100

 

обновлено: June 24, 2016 автором: globecore