d Reliability of Low Voltage Power Transformers - ! Equipment for Transformer Oil Reclamation. GlobeCore.

Reliability of Low Voltage Power Transformers

GlоbeCоre’s oil reclamation technology has been proven to cost effectively regenerate transformer oil thereby increasing the operational reliability of electric transmission equipment.

Before electric grid restructuring started, units with a voltage of between 110 and 500 kV (kilovolt) had constituted the greatest part of the fleet of transformers.  But the things have recently changed, today power companies routinely use transformers with voltage that is less than 110 kV with the majority of the transformers having a capacity of  less than 35 kV.

Table 1 analysis of the reasons for equipment damage depending on the point of fault.

Table 1

Damage Sources for Transformers with Voltage up to 35 kV


Type of Fault

Rate of the total % of faults

1 Winding faults


2 Bushing insulator


3 Insulation faults


4 Insulation moistening


5 Oil


6 Voltage regulators


7 Contacts in windings


9 Other


As we can see, the greatest amount of damage is the result of insulation faults. That is why the condition of transformer oil is of such importance.  The efficiency of the entire insulation system (both solid and liquid) largely depends on the quality and condition of the dielectric transformer oil.  Such factors as temperature extremes, interaction with the atmospheric oxygen, and the accumulation of emulsion water have a negative impact not only on the performance characteristics of oil, but also on the condition of the solid insulation.  As a result, transformers break down prematurely even though their service life should be much longer.

Unfortunately, once the transformer has experienced a catastrophic failure,  there is only one solution to this problem.   The failed transformer willl have to be replaced by a new one.  But, such a strategy requires significant capital expenditures and leads to reduced profits and inefficient operations.

The solution to this problem is to call GlоbeCоre who is in the business of designing and producing equipment for purification and regeneration of transformer oils.

GlobeCore promotes and adheres to the principle of “preventive maintenance.”  That means that the causes of transformer damage are prevented in the first place during transformer servicing.  It is transformer oil purification that helps insulting oil maintain its performance characteristics at the proper level and slows down the process of its aging.

GlоbeCоre produces equipment that allows for complete processing of transformer oil (purification, dehydration, and degasifying) to restore the original performance characteristics of the dielectric oil.

GlоbeCоre equipment is also very eco-friendly: there are no harmful discharges into the air since it uses the sorbent that can be reactivated to prevent the penetration of oil residues into water and soil.  The service life of transformers with a voltage up to 35 kV may be extended by 10 years if negative impacts are reduced.